; DDplus Door Control File
;-----------------------------------------------
; The semi-colons are comment markers. Remove them to activate option.
;
;Sysopfirst Specifies the first name of the sysop as it will be shown to
; the users.
;
;SysopLast Specifies the last name of the sysop as it will be shown to
; the users.
;
;BBSName Specifies the name of the bbs as it will be shown to users.
;
;Mono Will disable color on the local side. (Necessary if you are
; running a monochrome system)
;
;BBSType Specifies the type of bbs software under which this door program
; will be run. Valid bbs types include:
;
; DOORSYS - The DOOR.SYS format (Wildcat! 4.xx, GAP, etc)
; RBBS - Rbbs version 16.1+ (uses DORINFOx.DEF*)
; QUICK - Quickbbs,Force (uses DORINFOx.DEF**)
; DORINFO1 - Remote Access,others(uses DORINFO1.DEF**)
; PCB14 - Pcboard version 14
; PCB15 - Pcboard version 15
; PHOENIX - Phoenix bbs
; SPITFIRE - Spitfires drop file (SFDOORS.DAT)
; TRIBBS - TriBBS drop file (TRIBBS.SYS)
; WWIV - WWIV bbs (uses chain.txt)
; 2AM - Jumper.dat
;
; Notes * ANSI graphics is selected when a "2" is passed in the graphics
; parameter of the DORINFOx.DEF. RBBS, Maximus standard.
; ** ANSI graphics is selected when a "1" is passed in the graphics
; parameter of the DORINFOx.DEF. QuickBBS,Maximus,UltraBBS and
; many shareware BBSes require this type.
; ** Parameter of the DORINFO1.DEF. Remote Access others.
;
;
;ComPort For bbs types that do not have the com-port contained in their
; door information files you will have to specify the com-port.
; Simply put the port number (i.e. 1,2,etc) not the whole word COM1.
;
;Digi Selecting this option will cause ddplus to use its digiboard
; driver interface. This will not reset anything in the digiboard.
; Support speeds up to 115,200.
;
;Fossil Selecting this option will cause ddplus to use a fossil port
; driver. Note - do not use both fossil and Xfossil at the same
; time. This option initializes the port and resets the speed to
; either the lock speed (if locked) or the baud speed.
;
;Xfossil This is another way of selecting the fossil option. This method
; can support all speeds that your fossil can support. The fossil
; is not initialized by this option.
;
;LockBaud This will specify a locked baud rate. If you specify this
; parameter, then no matter what the bbs software says, this
; baud rate will be used. [NOTE: You can also specify the locked
; baud rate using /Bxxxx from the command line]
;
; If neither options digi, fossil, or xfossil are set the door will use its
; own internal comport handlers.
;
;Port1 If you must use a non-standard interrupt, the door can be
;Port2 configured for IRQs 0-15. The port# indicates the chosen comport
;Port3 Follow this with the port address in hex. Afterward put the IRQ
;Port4 in decimal. For an example if comport 3 at irq 15 and address
; $03E8 was needed use the following:
; PORT3 03E8 15
;
;Pausecode Specifies the Rip pause code that your bbs uses. This will
; be added to muliple page Rip news file so you can use them
; as a bulletin. Note - this option is only useful if the door
; indeed has rip bulletins.
;
;Maxtime The maxtime parameter will allow you to specify a maximum time
; per day that a user may be in the door. (i.e. if you specified
; 30 minutes, then if the user had 60 mins left, he could only play
; for 30 mins) Otherwise the game will use the maximum session
; time for maximum time.
;
;Status Specify "ON" if you wish the status line to appear at the bottom
; of "OFF" if you wish it to be disabled.
;
;Statfore Statfore foreground color of the status line and the major input
; fields. (default 7 light-grey)
;
;Statback The background color of the status line (default 1 blue)
;
;
;------------------------------ Sample Data ----------------------------------
;
SYSOPFIRST Bob
SYSOPLAST Dalton
BBSNAME The TANSTAFL BBS
;
; ::::------- Put your bbs type here! Select from those listed above.
; ::::
; \/\/
BBSTYPE DOORSYS
;
; If you are using a bbs type that doesn't provide the com
; ::-------- port num in it's door information file then uncomment this
; \/ line and put your comport here.
;COMPORT 1
;
; Uncomment the next line if you wish to use the digiboard driver support
; calls.
;DIGI
;
; Uncomment the next line if you use a fossil device driver and wish to have
; the door initialize your fossil to the locked/baud speed rate.
FOSSIL
;
; Uncomment the next line if you use a fossil device and do not wish to have
; the door reinitialize your fossil.
;XFOSSIL
;
; ::------If you are locking ports uncomment this line and set this
; :: number to the port speed.
; \/
;LOCKBAUD 57600
;
; ::------------ If you are going to use a non-standard IRQ place the
; :: port address in hex one space after the PORT# option.
; ::
; :: ::-------- If you have a non-standard IRQ position the IRQ number
; \/ \/ one space after the ports' hex address. (decimal)
;PORT1 03F8 4
;PORT2 02F8 3
;PORT3 03E8 4
;PORT4 02E8 3
; Uncomment this line if you want to make Rip bulletins
; ::-------------- for your BBS. Here a Wildcat pause is shown.
; \/
;PAUSECODE @PAUSE@
;
;------------------------------ End of File ----------------------------------